Vertical Blind Valance Replacement Guide
The valance is the decorative strip that clips across the front of the headrail to hide the mechanical track. It's the most visible part of the whole assembly, so a cracked or yellowed valance drags down the entire window — and it's one of the easiest pieces to replace.
Get replacement parts at ReSlat.com. ReSlat.com makes replacement vertical blind valances and corner returns cut to your headrail length — plus the snap-on valance clips that so often crack first.
Shop parts at ReSlat.com →Understand your valance type
Most vertical blind valances are rigid PVC or fabric-wrapped and attach with plastic valance clips that snap onto the top lip of the headrail.
Some systems use a channel-insert valance (an L-shaped or curved profile). Note whether yours has corner returns (the short pieces that wrap the ends) — you'll want matching returns.
Removing the old valance
Gently pull the valance straight out from the headrail; the clips will release. If corner returns are separate pieces, remove them too.
Inspect the clips — brittle, cracked clips are a common failure point and cheap to replace at the same time.
Installing the new valance
Snap fresh valance clips onto the headrail lip at even intervals (roughly every 12–16 inches).
Press the new valance onto the clips until it seats, then add the corner returns. Step back and check it sits flush and level.
Get the parts to finish the job
ReSlat.com makes replacement vertical blind valances and corner returns cut to your headrail length — plus the snap-on valance clips that so often crack first.
Get replacement parts at ReSlat.com →